Memory RAM | 64GB - Fujitsu - Siemens Primergy CX2560 M5 (D3854) Scale-Out Server - (OEM-# S26361-F4083-L464) (2024)

Bookmarks

Datasheet

Project price

Target system

Primergy CX2560 M5 (D3854) Scale-Out Server

Upgrade capacity

64GB

Number of modules

1

Capacity per module

64GB

Module organisation

8Gx72

Design

288pin DIMM DDR4 - 2933MHz , ECC, LRDIMM, 1,2V, 4 Rank, Xeon SP 1st Gen, Xeon SP 2nd Gen, Xeon SP 3rd Gen, 4Rx4

Module type

System specific RAM

Correction type

ECC

CompuRAM Part-#

CRM64D4/FPF4083L464-S009638

Replace OEM Part-#

S26361-F4083-L464

GTIN

4053651519946

Brand

CompuRAM

Manufacturer

Warranty

10 years manufacturer’s warranty

Item condition

New

Last price update

15th Jun 2024

Quickcode

XCB1A

Installation guide DIMM and SO-DIMM

Target system
Primergy CX2560 M5 (D3854) Scale-Out Server

System manufacturer
Fujitsu - Siemens

Category
Server

Configuration rules »

More upgrades for this system:

• 256GB Module (1 x 256GB) 288pin DIMM DDR4 - 2933MHz, ECC, Registered 3DS, 1,2V, 8 Rank, Xeon SP 2nd Gen, Xeon SP 3rd Gen, 2S4Rx4
• 256GB Module (1 x 256GB) 288pin DIMM DDR4 - 2933MHz, ECC, LRDIMM 3DS, 1,2V, 8 Rank, Xeon SP 2nd Gen, Xeon SP 3rd Gen, 8Rx4
• 128GB Module (1 x 128GB) 288pin DIMM DDR4 - 2933MHz, ECC, LRDIMM, 1,2V, 4 Rank, Xeon SP 2nd Gen, Xeon SP 3rd Gen, 4Rx4
• 128GB Module (1 x 128GB) 288pin DIMM DDR4 - 2933MHz, ECC, Registered 3DS, 1,2V, 4 Rank, Xeon SP 2nd Gen, Xeon SP 3rd Gen, 2S2Rx4
• 64GB Module (1 x 64GB) 288pin DIMM DDR4 - 2933MHz, ECC, Registered, 1,2V, 2 Rank, Xeon SP 2nd Gen, Xeon SP 3rd Gen, 2Rx4
• 32GB Module (1 x 32GB) 288pin DIMM DDR4 - 2933MHz, ECC, Registered, 1,2V, 2 Rank, Xeon SP 1st Gen, Xeon SP 2nd Gen, Xeon SP 3rd Gen, 2Rx4
• 16GB Module (1 x 16GB) 288pin DIMM DDR4 - 2933MHz, ECC, Registered, 1,2V, 2 Rank, Xeon SP 1st Gen, Xeon SP 2nd Gen, Xeon SP 3rd Gen, 2Rx8
• 16GB Module (1 x 16GB) 288pin DIMM DDR4 - 2933MHz, ECC, Registered, 1,2V, 1 Rank, Xeon SP 1st Gen, Xeon SP 2nd Gen, Xeon SP 3rd Gen, 1Rx4
• 16GB Module (1 x 16GB) 288pin DIMM DDR4 - 2933MHz, ECC, Registered, 1,2V, 2 Rank, Xeon SP 1st Gen, Xeon SP 2nd Gen, Xeon SP 3rd Gen, 2Rx4
• 8GB Module (1 x 8GB) 288pin DIMM DDR4 - 2933MHz, ECC, Registered, 1,2V, 1 Rank, Xeon SP 1st Gen, Xeon SP 2nd Gen, Xeon SP 3rd Gen, 1Rx8

All upgrades for this system.. »

• Primergy CX2560 M5 (D3854) Scale-Out Server RAM: Certified compatibility

  The 64GB Server RAM listed have been certified by us for your Primergy Scale-Out Server system. That means we vouch for the compatibility of the memory modules. CompuRAM memory modules can act like an original component to supplement RAM already installed or to be used as a spare part.

  Please also read this specific note on ‘secondary memory’ in Fujitsu-servers on our blog.

  In compliance with the Fujitsu - Siemens guidelines on memory upgrades, it is possible to run RAM modules from different manufacturers alongside each other in the same servers.
  Please note: The figures given in the product description for criteria such as speed and timings are the minimum specifications listed by Fujitsu - Siemens and are provided for reference purposes only. For our modules we always use the most current and fastest DRAMs. That means, that we typically provide memory modules that allow an even higher timing than neccessary for your system. In the product specifications, we explicitly indicate whether these components have integrated error correction methods such as ECC RAM (Error Correctioning Code or Error Checking and Correction).

• Retention of device guarantee and OEM quality for your Fujitsu - Siemens Primergy CX2560 M5 (D3854)

  If you install a CompuRAM memory module in your Primergy CX2560 M5 (D3854) server, this does not affect the manufacturer’s device guarantee; most manufacturers mention this explicitly in their guarantee conditions. Your entitlement to a guarantee will therefore remain unaffected by when the slots and ports intended for hardware expansions are used appropriately.

  By the way, CompuRAM memory modules are usually made the same manufacturer (OEM) as the original memory installed by the server manufacturer, e.g. Fujitsu - Siemens. The technologies that are required for the safe running of a server are also integrated features to our 288pin DIMM DDR4 upgrades.

• OEM Part-# - S26361-F4083-L464

  To facilitate the identification of the appropriate upgrades, we have additionally listed for the used of Fujitsu - Siemens designation S26361-F4083-L464 here.

• Making the best use of installed RAM

  If you have 4 GB RAM or more installed in your Primergy, you will need a 64-bit server operating system in order to take full advantage of this capacity. Here you will find an overview of maximum addressable RAM in all popular operating systems.

Our upgrade team is there for you personally.

Here you will find answers to payment and shipping.