Wait, didn't you find TIP you wanted? Find the moderate line and be satisfied
It probably meansyou want that can't do it with simple editing
OrTry many things
index (use Ctrl + f and search it)
- I don't want breasts to sag
- I don't want breasts to sag or jello even when lying
- I don't want breasts to be flat when run
- How do you weaken or disable Belly Bulge?
- How do you edit vagin* physics with Pelvis collision?
- How do you edit vagin* collision when directly collision not the Pelvis collision
- How do you edit the anus collision?
- How do you edit the anus collider position?
- How do you change belly bulge collision to directly collision instead of Spine1 collision
- How do you edit belly bulge collision when directly collision not the Spine1 collision
- I want to edit breasts push up effect when wearing an armor or clothes
- I want to edit breasts bounce when wearing an armor or clothes
- I want to reduce bounce
- How do you edit spread of breasts to less?
- How do you reduce strange bounce when colliding?
- How do you fix that legs are shaking infinitely
- How do you increase sensitivity of collision?
- How do you use SMP for anus?
CBPC
The description of CBPC config files for edit
CBPConfig.txt
- don't use
CBPConfig_3b.txt
- related breasts bouncy of 3BA body
CBPConfig_3b_armor.txt
- related auto breasts push up and reduce breasts movement strength of 3BA body when wearing armor and clothes
CBPConfig_3b_Gravity.txt
- related breasts sag of 3BA body by gravity
CBPConfig_3b_MoreGravity.txt
- related breasts more sag effect of 3BA body when lying down
CBPConfig_BreastAmplitude.txt
- related breasts movementstrength
CBPConfig_BBP.txt
- related breasts movemnt of CBBE body
CBPConfig_BBP_armor.txt
- related auto breasts push up and reduce breasts movement strength of CBBE body when wearing armor and clothes
CBPConfig_BBP_Gravity.txt
- related breasts sag of CBBE body by gravity
CBPConfig_BBP_MoreGravity.txt
- related breasts more sag effect of CBBE body when lying down
CBPConfig_belly.txt
- related belly movement
CBPConfig_BellyAmplitude.txt
- related belly movement strength
CBPConfig_butt.txt
- related butt movement
CBPConfig_ButtAmplitude.txt
- related butt movementstrength
CBPConfig_leg.txt
- related Front thigh, Rear thigh, Rear calf movement
CBPConfig_LegAmplitude.txt
- related Front thigh, Rear thigh, Rear calfmovementstrength
CBPConfig_SOS.txt
- related penis movement
CBPConfig_SOSScroum.txt
- related scroum movement
CBPConfig_vagin*.txt
- related vagin* physics for vagin* collisions
CBPCollisionConfig_Female.txt
- related Female NPCs and Female Player collision
CBPCollisionConfig.txt
- related Male NPCs and Male Player collision
These files are in the SKSE/Plugins path
- I don't want breasts to sag
1. Open the SKSE/Plugins/CBPConfig_3b_Gravity.txt file
ExtraBreast1R.gravityCorrection -0.4 -0.4ExtraBreast1L.gravityCorrection -0.4 -0.4
ExtraBreast2L.gravityCorrection -0.3 -0.3
ExtraBreast3L.gravityCorrection -0.2 -0.2
ExtraBreast2R.gravityCorrection -0.3 -0.3
ExtraBreast3R.gravityCorrection -0.2 -0.2
2. find these lines forgravityCorrection
3. edit values topositive values
ExtraBreast1R.gravityCorrection 0.4 0.4ExtraBreast1L.gravityCorrection 0.4 0.4
ExtraBreast2L.gravityCorrection 0.3 0.3
ExtraBreast3L.gravityCorrection 0.2 0.2
ExtraBreast2R.gravityCorrection 0.3 0.3
ExtraBreast3R.gravityCorrection 0.2 0.2
like this
- I don't want breasts to sag or jello even when lying
1. Open the SKSE/Plugins/CBPConfig_3b_MoreGravity.txt file
ExtraBreast1L.gravityInvertedCorrection -4.0 -4.0
ExtraBreast2L.gravityInvertedCorrection -5.5 -5.5
ExtraBreast3L.gravityInvertedCorrection -0.6 -0.6
ExtraBreast1R.gravityInvertedCorrection -4.0 -4.0
ExtraBreast2R.gravityInvertedCorrection -5.5 -5.5
ExtraBreast3R.gravityInvertedCorrection -0.6 -0.6
2. find these lines forgravityInvertedCorrection
3. edit values to 0
ExtraBreast1L.gravityInvertedCorrection 0 0
ExtraBreast2L.gravityInvertedCorrection 0 0
ExtraBreast3L.gravityInvertedCorrection 0 0
ExtraBreast1R.gravityInvertedCorrection 0 0
ExtraBreast2R.gravityInvertedCorrection 0 0
ExtraBreast3R.gravityInvertedCorrection 0 0
like this
- I don't want breasts to be flat when run
1. Open SKSE/Plugins/CBPConfig_3b.txt file
ExtraBreast1R.Yminoffset -0.8 -0.8ExtraBreast1L.Yminoffset -0.8 -0.8
ExtraBreast2L.Yminoffset -0.8 -0.8
ExtraBreast3L.Yminoffset -0.8 -0.8
ExtraBreast2R.Yminoffset -0.8 -0.8
ExtraBreast3R.Yminoffset -0.8 -0.8
2. find these lines for Yminoffset
3. Increase values, but don't enter positive numbers
- I want to exchange movement of 0 weight and movement of 1 weight
1. Open SKSE/Plugins/CBPConfig_*.txt filesabout body part that you want to edit
2. Exchange values with each other in all parameters
LFrontThigh.stiffnessX 0.015 0.03
LFrontThigh.stiffnessY 0.015 0.03
LFrontThigh.stiffnessZ 0.015 0.03
LRearThigh.stiffnessX 0.015 0.03
LRearThigh.stiffnessY 0.015 0.03
LRearThigh.stiffnessZ 0.015 0.03
LRearCalf.stiffnessX 0.015 0.03
LRearCalf.stiffnessY 0.015 0.03
LRearCalf.stiffnessZ 0.015 0.03
...
edit this like next
LFrontThigh.stiffnessX 0.03 0.015
LFrontThigh.stiffnessY 0.03 0.015
LFrontThigh.stiffnessZ 0.03 0.015
LRearThigh.stiffnessX 0.03 0.015
LRearThigh.stiffnessY 0.03 0.015
LRearThigh.stiffnessZ 0.03 0.015
LRearCalf.stiffnessX 0.03 0.015
LRearCalf.stiffnessY 0.03 0.015
LRearCalf.stiffnessZ 0.03 0.015
...
you have to edit all values andedit all files for body part you want
if you want know files related to body part
Look at top of this article
-How do you weaken or disable Belly Bulge?
1. Open SKSE/Plugins/CBPCollisionConfig_Female.txt file
BellyBulge=2.0
2. find these lines and reduce values
if you want to weaken belly bulge, reduce BellyBulge value
if you want to disable belly bulge, edit BellyBulge value to 0
- How do you edit vagin* physics with Pelvis collision?
1. Open SKSE/Plugins/CBPCollisionConfig_Female.txt file
vagin*OpeningMultiplier=3
2. find these line and reduce or increase this value
if you want to makeless vagin* open, reduce this value
if you want to make more vagin* open, increase this value
- How do you edit vagin* collision when directly collision not the Pelvis collision
1. Open SKSE/Plugins/CBPConfig_vagin*.txt file
cl*t.collisionXmaxoffset 0.1 LLabia.collisionXmaxoffset 0.1 RLabia.collisionXmaxoffset 100vagin*B.collisionXmaxoffset 0.1
vagin*B.collisionXminoffset -0.1
vagin*B.collisionYmaxoffset 0.1
vagin*B.collisionYminoffset -100
vagin*B.collisionZmaxoffset 0.5
vagin*B.collisionZminoffset -0.5
vagin*B.collisionMultipler 3.5
cl*t.collisionXminoffset -0.1
cl*t.collisionYmaxoffset 2.0
cl*t.collisionYminoffset -0.5
cl*t.collisionZmaxoffset 1.0
cl*t.collisionZminoffset -1.0
cl*t.collisionMultipler 3.0
LLabia.collisionXminoffset -100
LLabia.collisionYmaxoffset 0.5
LLabia.collisionYminoffset -0.5
LLabia.collisionZmaxoffset 0.5
LLabia.collisionZminoffset -0.5
LLabia.collisionMultipler 4.0
RLabia.collisionXminoffset -0.1
RLabia.collisionYmaxoffset 0.5
RLabia.collisionYminoffset -0.5
RLabia.collisionZmaxoffset 0.5
RLabia.collisionZminoffset -0.5
RLabia.collisionMultipler 4.0
2. find these lines and edit these values
collisionMultipler issimilar to vagin*OpeningMultiplier in CBPCollisionConfig_Female.txt
collisionX/Y/Zmax/minoffset are similar to vagin*OpeningLimit in CBPCollisionConfig_Female.txt
- How do you edit the anus collision?
1. OpenSKSE/Plugins/CBPCollisionConfig_Female.txtfile
AnusOpeningMultiplier=3
AnusOpeningLimit=20.0
2. find these line and reduce or increase this value
if you want to makeless anus open, reduce this value
if you want to make more anus open, increase this value
- How do you edit the anus collider position?
1. OpenSKSE/Plugins/CBPCollisionConfig_Female.txtfile
[Anal]
0,-6,-2,1.75 | 0,-6,-2,1.75
2. find these line and edit the position
CBPC - Physics with CollisionsYou can refer to pdf guide on CBPC page
In this case, it is based on the position of the Anal node in the skeleton instead body/armor mesh
- How do you change belly bulge collision to directly collision instead of Spine1 collision
1. Open SKSE/Plugins/CBPCMasterConfig.txt file
That file is probably in CBPC mod
HDT Belly=Belly=IsFemale()
2. find this line and add "#" toprefix
#HDT Belly=Belly=IsFemale()like this
3. then Open SKSE/Plugins/CBPCMasterConfig_3BA.txt file
HDT Belly=HDTBelly=IsFemale()
4. find this line and add "#" to prefix
#HDT Belly=HDTBelly=IsFemale()like this
- How do you edit belly bulge collision when directly collision not the Spine1 collision
1.Open SKSE/Plugins/CBPConfig_belly.txt file
Belly.collisionXmaxoffset 0.5 0.5Belly.collisionMultipler 3.0 3.0
Belly.collisionXminoffset -0.5 -0.5
Belly.collisionYmaxoffset 100 100
Belly.collisionYminoffset -0.5 -0.5
Belly.collisionZmaxoffset 1.0 1.0
Belly.collisionZminoffset -1.0 -1.0
2. find these lines and edit these values
collisionMultipler is similar toBellyBulge in CBPCollisionConfig_Female.txt
collisionX/Y/Zmax/minoffset are similar to BellyBulgeMax in CBPCollisionConfig_Female.txt
- I want to edit breasts push up effectwhen wearing an armor or clothes
1. Open SKSE/Plugins/CBPConfig_3b_armor.txt file
ExtraBreast1R.breastClothedPushup 0.5 0.5ExtraBreast1L.breastClothedPushup 0.5 0.5
ExtraBreast2L.breastClothedPushup 0.5 0.5
ExtraBreast3L.breastClothedPushup 0.5 0.5
ExtraBreast1L.breastLightArmoredPushup 1.0 1.0
ExtraBreast2L.breastLightArmoredPushup 1.0 1.0
ExtraBreast3L.breastLightArmoredPushup 1.0 1.0
ExtraBreast1L.breastHeavyArmoredPushup 1.5 1.5
ExtraBreast2L.breastHeavyArmoredPushup 1.5 1.5
ExtraBreast3L.breastHeavyArmoredPushup 1.5 1.5
ExtraBreast2R.breastClothedPushup 0.5 0.5
ExtraBreast3R.breastClothedPushup 0.5 0.5
ExtraBreast1R.breastLightArmoredPushup 1.0 1.0
ExtraBreast2R.breastLightArmoredPushup 1.0 1.0
ExtraBreast3R.breastLightArmoredPushup 1.0 1.0
ExtraBreast1R.breastHeavyArmoredPushup 1.5 1.5
ExtraBreast2R.breastHeavyArmoredPushup 1.5 1.5
ExtraBreast3R.breastHeavyArmoredPushup 1.5 1.5
2. find these lines and reduce or increase values
ClothedPushup is push up effect when wearing clothes
LightArmoredPushup is push up effect when wearing Light armor
HeavyArmoredPushup is push up effect when wearing Heavy armor
If you increase this value, the push up effect becomes more
If you reduce this value, the push up effect becomes less
- I want to editbreasts bouncewhen wearing an armor or clothes
1. OpenSKSE/Plugins/CBPConfig_3b_armor.txtfile
ExtraBreast1R.breastClothedAmplitude 0.9 0.9ExtraBreast1L.breastClothedAmplitude 0.9 0.9
ExtraBreast2L.breastClothedAmplitude 0.9 0.9
ExtraBreast3L.breastClothedAmplitude 0.9 0.9
ExtraBreast1L.breastLightArmoredAmplitude 0.8 0.8
ExtraBreast2L.breastLightArmoredAmplitude 0.8 0.8
ExtraBreast3L.breastLightArmoredAmplitude 0.8 0.8
ExtraBreast1L.breastHeavyArmoredAmplitude 0.7 0.7
ExtraBreast2L.breastHeavyArmoredAmplitude 0.7 0.7
ExtraBreast3L.breastHeavyArmoredAmplitude 0.7 0.7
ExtraBreast2R.breastClothedAmplitude 0.9 0.9
ExtraBreast3R.breastClothedAmplitude 0.9 0.9
ExtraBreast1R.breastLightArmoredAmplitude 0.8 0.8
ExtraBreast2R.breastLightArmoredAmplitude 0.8 0.8
ExtraBreast3R.breastLightArmoredAmplitude 0.8 0.8
ExtraBreast1R.breastHeavyArmoredAmplitude 0.7 0.7
ExtraBreast2R.breastHeavyArmoredAmplitude 0.7 0.7
ExtraBreast3R.breastHeavyArmoredAmplitude 0.7 0.7
2. find these lines and reduce or increase values from 0 to 1
ClothedAmplitudeis breasts movementwhen wearing clothes
LightArmoredAmplitude is breasts movementwhen wearing Light armor
HeavyArmoredAmplitude is breasts movement when wearing Heavy armor
If you increase this values, breasts movement becomes like nude
If you reduce this values, breasts movement becomes less
- I want to reduce bounce
This is for those who are not confident to edit all parametersso It might not be good for all situations
1. OpenSKSE/Plugins/CBPConfig_*Amplitude.txtfilesabout body part that you want to edit
RBreast.amplitude 1 1 Breast.amplitude 1 1ExtraBreast1L.amplitude 1 1
ExtraBreast2L.amplitude 1 1
ExtraBreast3L.amplitude 1 1
ExtraBreast1R.amplitude 1 1
ExtraBreast2R.amplitude 1 1
ExtraBreast3R.amplitude 1 1
LBreast.amplitude 1 1
2. find these lines foramplitude like this
3. reduce values
if you want know files related to body part
Look at top of this article
-
How do you edit spread of breasts to less?
This is for those who are not confident to edit all parameters
so It might not be good for some cases
1.Open SKSE/Plugins/CBPConfig_3b.txt file
ExtraBreast1R.rotationalZ 0.0665 0.0665ExtraBreast1L.rotationalZ -0.0665 -0.0665
ExtraBreast2L.rotationalZ -0.1021 -0.1021
ExtraBreast3L.rotationalZ -0.0878 -0.0878
ExtraBreast2R.rotationalZ 0.1021 0.1021
ExtraBreast3R.rotationalZ 0.0878 0.0878
2. find these lines for rotationalZ
3.if that value for L, increase values
if that value for R, reduce values
ExtraBreast1L.rotationalZ -0.0665 -0.0665
ExtraBreast2L.rotationalZ -0.1021 -0.1021
ExtraBreast3L.rotationalZ -0.0878 -0.0878
so this values, have to increase values
ExtraBreast1R.rotationalZ 0.0665 0.0665
ExtraBreast2R.rotationalZ 0.1021 0.1021
ExtraBreast3R.rotationalZ 0.0878 0.0878
and this values, have to reduce values
and values other than negative and positive must be symmetrical
- How do you reduce strange bounce when colliding?
1. Open SKSE/Plugins/CBPConfig_3b.txt
ExtraBreast1L.collisionFriction 0.02 0.02
ExtraBreast2L.collisionFriction 0.02 0.02
ExtraBreast3L.collisionFriction 0.02 0.02
ExtraBreast1R.collisionFriction 0.02 0.02
ExtraBreast2R.collisionFriction 0.02 0.02
ExtraBreast3R.collisionFriction 0.02 0.02
2. find thes lines for collisionFriction
3. increase these values
You can increase up to 1.0, but i don't recommend 1.0
ExtraBreast1L.collisionFriction 0.2 0.2
ExtraBreast2L.collisionFriction 0.2 0.2
ExtraBreast3L.collisionFriction 0.2 0.2
ExtraBreast1R.collisionFriction 0.2 0.2
ExtraBreast2R.collisionFriction 0.2 0.2
ExtraBreast3R.collisionFriction 0.2 0.2
Don't copy it and just find the value you like
SMP
The description of SMP config files for edit
3BBB-Amazing.xml
- SMP Physics file for player when toggled to SMP Mode
Outfits/3BCA-A-Amazing.xml
- SMP Physics file for NPC when toggled to SMP Mode with Acup
Outfits/3BCA-B-Amazing.xml
- SMP Physics file for NPC when toggled to SMP Mode with Bcup
Outfits/3BCA-C-Amazing.xml
- SMP Physics file for NPC when toggled to SMP Mode with Ccup
Outfits/3BCA-D-Amazing.xml
- SMP Physics file for NPC when toggled to SMP Mode with Dcup
These files are in the SKSE\Plugins\hdtSkinnedMeshConfigs path
- How do you fix that legs are shaking infinitely
Are you using Karonar1's SMP? (hdtSMP64/hdtSMP64 at master · Karonar1/hdtSMP64 (github.com))
if so, uninstall that Karonar's SMP
then install the Aers' HDT SMP or Faster HDT SMP
- How do you increase sensitivity of collision?
1. open the xml file you want (Look at the description of above about file)
<per-triangle-shape name="3BCA_Hand">
<margin>0.01</margin>
<penetration>0.4</penetration>
2.Find the lines related to margin or penetration
The
shape name="3BCA_Hand" part
It literally means a collision related to Hand
3. increase or reduce margin or penetration values
if increase margin, the collision reacts even if less close
if reduce margin, for collision reacts, need more close
if increase penetration, the collision effect is stronger when collision reacted
if reduce penetration, the collision effect is less when collision reacted
-
How do you use SMP for anus?
In general, Anus can be opened only for animations made from XPMSSE 4.6x or higher
This means that only animations made later than this body mod can be anus open
But there are still many people who use old animations, so there are many people who haven't see it
It's usually recommended to open anus through animation
Neverthelessfor some users, I already made it from v2.00 (If edit a bit, so that can use it)
But there's only one person who figured this out lol
Recommendations
When install XPMSSE, you have to select "Physics Extension Old 4.51V" and install that
Have to do
1. open xml file your want (about file kind, look at the above)
<bone name="NPC RT Anus2"/>
<bone name="NPC LT Anus2"/>
<bone name="NPC RB Anus2"/>
<bone name="NPC LB Anus2"/>
<bone name="NPC Anus Deep2"/>
2.edit these lines like next (add <!-- and -->)
<!--
<bone name="NPC RT Anus2"/>
<bone name="NPC LT Anus2"/>
<bone name="NPC RB Anus2"/>
<bone name="NPC LB Anus2"/>
<bone name="NPC Anus Deep2"/>
-->
3. then scroll down and find the next section
There are a lot of lines that you need to look for find
But have to edit lines are very little
SMP is difficult to edit because all values are organically intertwined
So there's no "TIP" to get close to what you want to physics by simply editing
But there are a lot of example files that you can see around you, so you just have to try
